Benick News Slitter Rewinders, Slitters, Converting Machinery

Maximum Impact, Minimum Cost Our customer had a limited budget for a machine and did not want a completely rebuilt machine. He asked what would be the best improvement he could make to help productivity. We suggested a new pair of Benick indirect friction air differential rewind mandrels. He understood that the bottle neck would be in setting up the rewind shafts, with every master roll requiring a new slit width during set up. Our grateful customer chose this option.


Dusenbery 635 Cantilevered Modification Picture below is another satisfied customer viewing the acceptance trial of a recently rebuilt and modified Dusenbery 635. The conversion of the rewind to a cantilevered design makes unloading finished product a breeze, much to the satisfaction of the customer. Watch a Video of The Trial Run


Arrow 325 Rebuild Here is an Arrow Model 325 we rebuilt for a customer requiring very narrow width slitting. The requirements involved a variety of substrates slit down to 1/4 inch width. We also provided operator training here at Benick and at the new owners facility.

NICELY EQUIPPED REBUILD Here is a nice example of a slitter we refurbished to run coated foils for a battery application. We used an REM 3250 for the base platform. The machine was stretched from 18" wide to accommodate a 24" web. We replaced and recovered idlers with chrome. The slitting section was modified to optimize slit edge quality and we also added web cleaning units. Trials were run here at Benick and our customer was pleased with his machine and its capabilities.

NEW INSTALLATION Here is a beautiful 2001 Dusenbery Model 835 we have delivered and installed for one of our valued customers. In addition to the sale and installation we are providing operator training and ongoing technical support!


*THREES A CHARM* This customer was so happy with our services that they bought three of our refurbished slitters. In this installation we also provided operator training.