Dusenbery 635 Cantilevered Modification
Picture below is another satisfied customer viewing the acceptance trial of a recently rebuilt and modified Dusenbery 635. The conversion of the rewind to a cantilevered design makes unloading finished product a breeze.
 

Arrow 325 Rebuild
Here is an Arrow Model 325 we rebuilt for a customer requiring very narrow width slitting. The requirements involved a variety of substrates slit down to 1/4 inch width. We also provided operator training here at Benick and at the new owners facility.
 

NICELY EQUIPPED REBUILD
Here is a nice example of a slitter we refurbished to run coated foils for a battery application. We used an REM 3250 for the base platform. The machine was stretched from 18" wide to accommodate a 24" web. We replaced and recovered idlers with chrome. The slitting section was modified to optimize slit edge quality and we also added web cleaning units. Trials were run here at Benick and our customer was pleased with his machine and its capabilities.

NEW INSTALLATION
Here is a beautiful 2001 Dusenbery Model 835 we have delivered and installed for one of our valued customers. In addition to the sale and installation we are providing operator training and ongoing technical support!
 

Copyright © 2003 Benick Machineworks LLC
348 Orchard Hill Road P.O. Box 7
Pomfret Center, CT 06259 USA 860-963-0255 Fax: 860-963-1054
sales @benick.com